如何建立一个廉价的地热空调系统冷却用一辆旧汽车散热器,太阳能电池板您的主页。



最近的帖子你可能会喜欢
  • 万博体育网DIY视频:如何在家里建立一个真棒水刀的非常便宜.Build终极切削刀具
    该视频显示一个$ 100K值得一水刀约200 $使用廉价的压力washer.Waterjet的构建是最终的机床,无论application.This是因为它是一种冷切割技术,这意味着没有热或压力被施加到你切materials.Also可以直接采取部分关闭割台,无二次加工required.Also它消除了矿渣变形与糟粕废弃物 - 不幸的作用在等离子和激光切割过程中发现。

    观看DIY自制廉价水刀构建视频

  • 如何使用PVC部件从流动的河流或溪流/河产生脱离电网电源建设一个自制阿基米德螺旋涡轮机
    此视频系列示出了微水电系统的使用水槽这基本上是一个水槽携带水在一定的高度,从而水可以fall.The水进入在顶部的螺钉和水推的在螺旋的重量设定航班,使水落下到下级并且使螺钉rotate.This旋转能量然后可以通过连接到所述螺钉的主轴电发生器中提取。你需要建立这个四个装饰板的材料 - 作为地板在尺寸上引导水。Two 2x4’s – These will be cut to provide support for the decking boards,Screws - To secure the boards in place.6” PVC Pipe – Used as the body casing,Flange Bering – To spin the turbine,PVC T-Joint – Serves as the opening to let water flow through it,Farm Auger – This will spin as the water flows through it. Building the flume is a simple process, but it may take a lot of work depending on how far you need to take the water. We will show you how to build one section of the flume. From there, you can replicate this and make the flume as long as you need to. Take your 2x4’s and cut out two pieces that are 22 inches long, two pieces that are 17 inches long, and four pieces that are 8 inches long. Start out by laying the three 22 inch pieces horizontally and place two decking boards on top of them. Take the other two decking boards and use them as the side barriers for the water. Attach the four 8 inch pieces on either side of the supports and use the 17-inch pieces as cross supports over top of the flume. This is the completed section of the flume. Continue to replicate this and add to the flume as needed. You can attach stilts to the bottom of the flume to angle it downwards for the water to flow through it. Building the Archimedes screw turbine is simple. To start, simply take your PVC pipe and attach the pieces together. Since this is only a four-piece setup, it is very straightforward to set up. Insert the auger and make sure it has room to spin without too much friction slowing it down. Once the Archimedes screw turbine is put together, bring it to your flume and you can begin using it. Situate the flume so that it is creating a waterfall that you can position the screw turbine underneath. As water flows into the turbine, it will spin it. You can use this force to generate electricity. One of the great things about this setup is that it never stops. For as long as you have running water in the area, you will be able to generate electricity with this setup.
    观看自制的微型水力涡轮机建造和安装

  • 万博体育网DIY视频:如何建立你自己的DIY离网/网下太阳能发电备份系统从无到有.Complete视频指导初学者。
    该视频展示了如何建立自己的重型太阳能能源系统在自己家里。本指南将告诉你一个太阳能供电系统从开始到结束的基本设置。关于本教程的最好的部分是,它是可扩展的。不管是什么类型的太阳能电池板,你开始接触,你将能够复制这一点,并让它为你工作。我们建议调整充电控制器,逆变器和电池的大小根据太阳能发电是什么,你有。阅读下面找出你如何让自己的太阳能发电能源系统yourself.DIY太阳能发电可能看起来像一个艰巨的任务。不要害怕,这个视频将设置你在正确的道路上。我们拆散离网型太阳能发电的神秘面纱开始,教你的基础知识,如何理解和思考你的系统。

    观看DIY自制离网太阳能发电备份系统构建