如何使用PVC部件从流动的河流或溪流/河产生脱离电网电源建设一个自制阿基米德螺旋涡轮机

此视频系列示出了微水电系统的使用水槽这基本上是一个水槽携带水在一定的高度,从而水可以fall.The水进入在顶部的螺钉和水推的在螺旋的重量设定航班,使水落下到下级并且使螺钉rotate.This旋转能量然后可以通过连接到所述螺钉的主轴电发生器中提取。

你需要建立这个四个装饰板的材料 - 作为地板在尺寸上引导水。
Two 2×4’s – These will be cut to provide support for the decking boards,Screws – To secure the boards in place.6” PVC Pipe – Used as the body casing,Flange Bering – To spin the turbine,PVC T-Joint – Serves as the opening to let water flow through it,Farm Auger – This will spin as the water flows through it.

构建水槽是一个简单的过程,而是取决于你所需要多远冒水可能需要大量的工作。我们将向你展示如何构建水槽的一个部分。从那里,你可以复制这一点,使水槽,只要你需要。

把你的2×4的切出两片是身长22英寸,两片17英寸长,四件是8英寸长。通过平三个22英寸件启动了,并把他们的前两名装饰板。就拿其他两个装饰板,并用它们作为水侧部屏障。连接在支撑件的任一侧上的4个8英寸的片并使用17英寸件如横向支承件在所述水槽的顶部。

这是水槽的完整部分。继续复制这一点,并根据需要添加到水槽。您可以将高跷对角向下它的水通过它流水槽的底部。

构建阿基米德螺旋涡轮机很简单。首先,简单地把你的PVC管件连接在一起。由于这只是一个四件的设置,这是非常简单的设置。插入螺旋,并确保它有空间旋转没有太多的摩擦减缓下来。

一旦阿基米德螺旋涡轮机放在一起,它带给您的水槽,你可以开始使用它。宅院的水槽,这样它正在创建一个瀑布,你可以放置螺旋涡轮下方。由于水流入涡轮,它会旋转它。您可以使用此力来发电。
一个关于这一步的伟大的事情是,它从不停止。只要你在该地区的自来水,你就可以在此设置来发电。

观看自制的微型水力涡轮机建造和安装



最近的帖子你可能会喜欢
  • 万博体育网DIY视频:如何挖浅井从Scratch.Step一步的视频指令
    该视频展示了如何从占卜杖探测到挖挖加盖一个浅井你的财产。这浅井将为我们的蜜蜂和配套厂提供的水。This dig uses a modified hand auger and took about 4 hours to complete (17 feet with nearly 4 feet of water).Learning how to dig a well is a good lesson that every prepper should master.Even if it doesn’t come to a survival scenario, having your own water supply means that you’re basically off the grid. You’re not dependent upon third parties.

    观看浅打井视频教学

  • manbetx ios
    这3部分视频系列向您介绍如何安全地建立从20英尺航运container.This地下生存住房是一个20英尺集装箱可以如何被掩埋,钢筋,并增加公共事业做出很大的一步一步的例子shelter that has everything you’d need in an emergency, and double as a cellar for food storage.Whether you’d like a cellar, prepper space, a ‘man cave’ or just an addition onto your home, shipping containers are quite a good start for above or below the ground shelters or rooms.

    观看DIY地下集运生存地堡建造影片

  • 如何建立从老汽车轮子上的简单的自制带锯厂
    [the_ad id="6432"] This video shows the build of an really inexpensive homemade bandsaw mill out of old car wheels.One of the best things about this design is it’s simplicity of course, but it’s also made from salvaged and repurposed materials, which helps cut the cost of the sawmill down to an affordable level. Not everyone can afford $4000 to $5000 for a brand new portable sawmill. Building your own sawmill not only gives you that sense of satisfaction of doing it yourself, but it saves you money.Bottom line, it’s a tool you’ll use for years to come, and will more than pay for itself the first time you use it. Lumber isn’t cheap, and if you’ve got the natural resources and access to those resources, it makes the most sense to save money, time, and effort by using what you have available

    观看旧汽车轮毂制作影片的DIY自制磨带锯