如何建立一个简单而有效的自制车库扇出古炉鼓风机的

该视频显示一个自制车库风扇旧炉鼓风机做出来的积累,很容易使真正efficient.Once尝试的这些,你将永远不会再使用箱式风扇一个。这些风扇被设计为与恒限制运行。因此,你需要通过阻断进气口或输出的大约25%,在开放中使用出来的时候重新创建此。如果不限制气流电机将拉动显著高安培比它的额定电流为,将过热/烧坏。

如果你想成为科学的,你可以看看电机侧和读取的额定安培。然后用载荷计挂接,运行它,直到安培拉伸降低到或接近额定amps.Centrifugal风扇是惊人的在移动的空气的量大和输出可以不同的轴向通过管道阻挡的气流。

观看高炉鼓风机视频DIY自制离心风机车库



最近的帖子你可能会喜欢
  • 如何使一个生存绳子在家中从容易获得的材料制造机
    一个生存装备中最重要的作品中已经是绳子,它肯定是使用的材料是你应该在你的跑路袋荒野survival.This系列影片展示了一个简单绳机在国内构建,你可以获得在当地的硬件store.There是没有这样的事情跃跃欲试生存,而不必在你的stash.You绳和绳索可以使用他们的渔线,弓弦,陷阱触发,陷阱,圈套,和其他许多things.And你知道哪些项目将是第一个在危机中变得不可用?有几个,和绳索和绳索将是其中之一。

    观看视频DIY系列在万博体育网家里制作自制绳机

  • 万博体育网DIY视频:如何建立一个廉价的自制HHO氢气发生器.Great进行切割,熔炼,焊接和抛光
    该视频显示一个自制HHO发生器的构建和用于焊炬切割和焊接的废金属。这种安全炬使得用于焊接,钎焊,焊接,钻孔,切割,抛光和退火金属,陶瓷,玻璃和plastics.The一个理想的工具火焰/燃料发电机内部产生从蒸馏水燃料的氢气和氧气的气体,利用电解处理。的气体被在所需的有效的火焰燃烧的二对一的比率自然产生。

    观看DIY自制HHO氢气发生器生成视频

  • 如何使用PVC部件从流动的河流或溪流/河产生脱离电网电源建设一个自制阿基米德螺旋涡轮机
    此视频系列示出了微水电系统的使用水槽这基本上是一个水槽携带水在一定的高度,从而水可以fall.The水进入在顶部的螺钉和水推的在螺旋的重量设定航班,使水落下到下级并且使螺钉rotate.This旋转能量然后可以通过连接到所述螺钉的主轴电发生器中提取。你需要建立这个四个装饰板的材料 - 作为地板在尺寸上引导水。Two 2x4’s – These will be cut to provide support for the decking boards,Screws - To secure the boards in place.6” PVC Pipe – Used as the body casing,Flange Bering – To spin the turbine,PVC T-Joint – Serves as the opening to let water flow through it,Farm Auger – This will spin as the water flows through it. Building the flume is a simple process, but it may take a lot of work depending on how far you need to take the water. We will show you how to build one section of the flume. From there, you can replicate this and make the flume as long as you need to. Take your 2x4’s and cut out two pieces that are 22 inches long, two pieces that are 17 inches long, and four pieces that are 8 inches long. Start out by laying the three 22 inch pieces horizontally and place two decking boards on top of them. Take the other two decking boards and use them as the side barriers for the water. Attach the four 8 inch pieces on either side of the supports and use the 17-inch pieces as cross supports over top of the flume. This is the completed section of the flume. Continue to replicate this and add to the flume as needed. You can attach stilts to the bottom of the flume to angle it downwards for the water to flow through it. Building the Archimedes screw turbine is simple. To start, simply take your PVC pipe and attach the pieces together. Since this is only a four-piece setup, it is very straightforward to set up. Insert the auger and make sure it has room to spin without too much friction slowing it down. Once the Archimedes screw turbine is put together, bring it to your flume and you can begin using it. Situate the flume so that it is creating a waterfall that you can position the screw turbine underneath. As water flows into the turbine, it will spin it. You can use this force to generate electricity. One of the great things about this setup is that it never stops. For as long as you have running water in the area, you will be able to generate electricity with this setup.
    观看自制的微型水力涡轮机建造和安装